Chrome Alternator

Chrome Alternator”

One of the most vulnerable of the otherwise very reliable Jeep Cherokee is the alternator. The generator is very low in the engine and is capable be damaged conditions of mud and water on the ground.

Usually the first indication of a fault in the alternator will the check engine light. The computer control of the alternator and detect when you are not sufficiently attentive to your commands. The second indication is a voltage drop.

To replace the alternator:

1. Remove the battery and battery tray.
2. Remove air box and loosen the screws on the power steering pump to loosen the belt. It is absolutely necessary to loosen the belt re-install the alternator, but it feels much easier.
3. Working under the Jeep, unplug the power cord main generator. It will be a heavy wire cover over the bolt
4. Then remove the control cables. In some older models, it is in place by a screw 7 mm unusual. There are four robots overall conclusion of this connection in place.
5. Today, working from the top, remove the mounting screws top and bottom.
6. Note the stamped steel reinforcement Front engine alternator bolts. Loosen but do not remove the pin next to the alternator support. This will help you get a space re-installing the new alternator.
7. To remove the alternator in the engine compartment, you probably need to raise a small engine. The best how to do this is with a jack under the engine oil pan. Be sure to spread the load with a wood block to avoid damaging the sump.
8. You can also have a few lines AC double interferes with the removal of the alternator.
9. Install the new alternator in place.
10. Lower engine in place and reinstall the screws.
11. Tighten the bolt by bolt so loose before.
12. Replace control wiring harness.
13. Replace the main cable. And replace the lid.
14. Tighten the belt.
15. Couple at assisted and replace the air box.
16. Delete all the keys you have left on the ground.
17. Reinstall the battery box and reconnect the battery and give it a try.
18. Engine Light control should be eliminated immediately and the battery voltage should begin to rise.

Note that if the right to discharge the battery before to replace the alternator, which is a good idea to charge the battery from a different source before installing a new alternator. The new alternator can be permanently damaged by placing a high burden of the load on him in his first start.

Mike Strawbridge is a Performance Improvement Coach who loves helping people achieve what they truly want in life and business.

To learn more about Jeep Cherokee performance and maintenance, see ==> Jeep Cherokee Trouble Shooting